User News

Scaling to Petascale Institute - June 26-30, 2017

Posted by Jason Allison on Apr 19, 2017 11:50:10 AM

Do you have a computational problem that would benefit from using a large scale computing system? Do you need to scale your simulation or data analysis to a petascale system? Registration is now open for the “Scaling to Petascale Institute” to be held June 26-30, 2017. Details are at...

Do you have a computational problem that would benefit from using a large scale computing system?

Do you need to scale your simulation or data analysis to a petascale system?

Registration is now open for the “Scaling to Petascale Institute” to be held June 26-30, 2017. Details are at https://bluewaters.ncsa.illinois.edu/petascale-summer-institute

This institute is for people developing, modifying and supporting research projects who seek to enhance their knowledge and skills to scale software to petascale and emerging extreme scale computing systems. Participants should have familiarity with Linux, programming in Fortran, C, C++, Python or similar language, and familiarity with MPI (message passing interface). There will be hands-on activities for many of the sessions.

Presentations will be made by faculty and professionals from Argonne Leadership Computing Facility (ALCF), the Blue Waters project at the National Center for Supercomputing Applications (NCSA), National Energy Research Scientific Computing Center (NERSC), Oak Ridge Leadership Computing Facility (OLCF), Stony Brook University, and the Texas Advanced Computing Center (TACC).

The agenda will address the following topics.

MPI - Introduction and Advanced topics
OpenMP
Scaling, code profiling, and debugging
GPU programming
OpenACC
Phi programming
Software libraries
Parallel I/O
HDF5
Globus
Software engineering

Wrangler Status 4/16/2017

Posted by Lucas Nopoulos on Apr 16, 2017 11:43:17 AM

Filesystem /gpfs/flash is unavailable on Wrangler due to issues with the Flash storage servers. We are working to resolve this.


--TACC Team 

Updated on Apr 16, 2017 12:58:08 PM

Filesystem /gpfs/flash has been restored on Wrangler. Please submit a ticket for any issues with jobs that were running using that filesystem


--TACC Team

Original Posting

Filesystem /gpfs/flash is unavailable on Wrangler due to issues with the Flash storage servers. We are working to resolve this.


--TACC Team 

Wrangler status April 14 2017

Posted by David Littrell on Apr 14, 2017 11:16:16 PM

Wrangler's gpfs filesystem is currently unavailable from the login node. If you need to access your files then run an idev session to a compute node and find them there. We will resolve this issue as quickly as possible.

Updated on Apr 15, 2017 10:11:22 AM

Wrangler's gpfs filesystem is restored on the login node.


Thanks,
TACC Team

Original Posting

Wrangler's gpfs filesystem is currently unavailable from the login node. If you need to access your files then run an idev session to a compute node and find them there. We will resolve this issue as quickly as possible.

Ranch Maintenance 4/25/2017

Posted by Matthew Edeker on Apr 13, 2017 4:39:38 PM

TACC’s Ranch will not be available from 8 a.m. to 5:00 p.m. (CST) on Tuesday, April 25th, 2017. System maintenance will be performed during this time.


Thank you

 - TACC Team

TACC’s Ranch will not be available from 8 a.m. to 5:00 p.m. (CST) on Tuesday, April 25th, 2017. System maintenance will be performed during this time.


Thank you

 - TACC Team

Lonestar5 Status 12 April 2017

Posted by Sergio Leal on Apr 12, 2017 11:13:42 AM

Slurm is currently unavailable on Lonestar5. We are working on resolving the issue as quickly as possible.

Updated on Apr 12, 2017 7:45:40 PM

Lonestar 5 is back in production as of 7 PM local time.

Original Posting

Slurm is currently unavailable on Lonestar5. We are working on resolving the issue as quickly as possible.

Lonestar5 Maintenance 25 April 2017

Posted by Sergio Leal on Apr 11, 2017 11:40:25 AM

LoneStar5 will not be available from 8 a.m. to 5:00 p.m. (CT) on Tuesday, 25 April 2017. System maintenance will be performed during this time.

LoneStar5 will not be available from 8 a.m. to 5:00 p.m. (CT) on Tuesday, 25 April 2017. System maintenance will be performed during this time.

Lonestar 5 status April 4, 2017

Posted by Lucas Nopoulos on Apr 4, 2017 10:23:45 AM

We are experiencing problems with the DVS servers causing LS5 to be unavailable. We are working on the problem and will resolve as soon as possible.


-TACC team


Updated on Apr 4, 2017 4:22:11 PM

The issue with LS5 /work filesystem has been resolved and the cluster is back in production.

Original Posting

We are experiencing problems with the DVS servers causing LS5 to be unavailable. We are working on the problem and will resolve as soon as possible.


-TACC team


Big Data Analysis Training Series

Posted by Jason Allison on Mar 28, 2017 2:58:55 PM

TACC will be offering the following courses as a series in Big Data Analysis. Introduction To Hadoop And Spark On Wrangler - April 20, 2017 Introduction To Scala/Spark - April 27, 2017 Data Analysis Using Hadoop/Spark - May 4, 2017 This training series will cover an introduction to the Big Data...

TACC will be offering the following courses as a series in Big Data Analysis.

Introduction To Hadoop And Spark On Wrangler - April 20, 2017
Introduction To Scala/Spark - April 27, 2017
Data Analysis Using Hadoop/Spark - May 4, 2017

This training series will cover an introduction to the Big Data processing platforms, programming models as well as libraries and tools that are specifically designed for data-driven analysis. Each course will be three and a half hours long with approximately three hours of lecture and a half hour of hands-on practice.

Participants are strongly encouraged to sign up for all three courses, as each session will be built on topics from the previous sessions. That stated, participants can also choose only those courses that are best suited for their interest and knowledge level.

Please visit the following link for more information and to register:

https://portal.tacc.utexas.edu/training#/user?training=upcoming

OpenMP Courses - April 28th, 2017

Posted by Jason Allison on Mar 28, 2017 2:31:20 PM

On April 28th, 2017; TACC will be offering a morning introductory course and an afternoon performance optimization course on OpenMP. The morning course will introduce participants to the OpenMP threading model, and describe the basic constructs necessary to parallelize loops on manycore...

On April 28th, 2017; TACC will be offering a morning introductory course and an afternoon performance optimization course on OpenMP.

The morning course will introduce participants to the OpenMP threading model, and describe the basic constructs necessary to parallelize loops on manycore architectures. Topics covered will include understanding the fork/join threading model, using OpenMP pragmas, and loop parallelization.

The afternoon course will provide an introduction to OpenMP optimization techniques for manycore and vectorized architectures. Topics covered will include using OpenMP’s SIMD directives, configuring OpenMP thread affinity, and changing OpenMP thread scheduling behavior.

You are welcome to register for either or both courses. Both of the courses are available to in-person and webcast participants. Local participants are strongly encouraged to attend in person.

For more details on course content and for access to register for these courses, please visit the following link:

https://portal.tacc.utexas.edu/training#/user?training=upcoming

Wrangler Maintenance 3/28

Posted by Matthew Edeker on Mar 20, 2017 8:23:03 PM

Wrangler will not be available from 9 a.m. to 11 a.m. (CT) on Tuesday, 28 March 2017. System maintenance will be performed during this time. 

Thank you, 

 - TACC Team


Updated on Mar 28, 2017 9:32:53 AM

Maintenance has been extended until 1 PM today. Apologies for the delay.


-TACC Team

Original Posting

Wrangler will not be available from 9 a.m. to 11 a.m. (CT) on Tuesday, 28 March 2017. System maintenance will be performed during this time. 

Thank you, 

 - TACC Team


Stampede Status 4-4-2017

Posted by Jacob Getz on Mar 28, 2017 8:13:46 AM

Stampede will not be available from 8 am to 7:30 pm (CDT) on Tuesday, April 4th 2017. System maintenance will be performed during this time.


 - TACC Team

Stampede will not be available from 8 am to 7:30 pm (CDT) on Tuesday, April 4th 2017. System maintenance will be performed during this time.


 - TACC Team

Wrangler user list announcement 3/25/2017

Posted by Matthew Edeker on Mar 25, 2017 8:20:06 PM

Wrangler experienced issues with the dssd nodes supporting /gpfs/flash filesystem. There were a number of jobs running at the time, many were not using this filesystem so should be unaffected. If your jobs were using /gpfs/flash and have failed because of the outage please submit a ticket and let...

Wrangler experienced issues with the dssd nodes supporting /gpfs/flash filesystem. There were a number of jobs running at the time, many were not using this filesystem so should be unaffected. If your jobs were using /gpfs/flash and have failed because of the outage please submit a ticket and let us know.


Thanks

TACC Team

MPI Foundations I and II

Posted by Jason Allison on Mar 24, 2017 11:15:06 AM

On April 14th, 2017; TACC will be offering a morning and an afternoon course on MPI Foundations. You are welcome to register for either or both courses. Both of the courses are available to in-person and webcast participants. Local participants are strongly encouraged to attend in person. For...

On April 14th, 2017; TACC will be offering a morning and an afternoon course on MPI Foundations.

You are welcome to register for either or both courses. Both of the courses are available to in-person and webcast participants. Local participants are strongly encouraged to attend in person.

For details on course content and for access to register for these courses, please visit the following link:

https://portal.tacc.utexas.edu/training#/user?training=upcoming

R HPC Training

Posted by Jason Allison on Mar 23, 2017 1:34:18 PM

April 13th, 2017 1pm-4pm CT Texas Advanced Computing Center ACB 1.104 J.J. Pickle Research Campus 10100 Burnet Rd. Austin, TX 78758 This training will provide existing R users with training on how to use R in an HPC environment. We will cover logistical issues with getting your R code up and...

April 13th, 2017 1pm-4pm CT
Texas Advanced Computing Center
ACB 1.104
J.J. Pickle Research Campus
10100 Burnet Rd. Austin, TX 78758

This training will provide existing R users with training on how to use R in an HPC environment. We will cover logistical issues with getting your R code up and running on TACC resources, as well as how to take advantage of the unique resources available at TACC. This includes covering usage of the 'parallel' package in R and how to manage CRAN packages in a multi-user environment. Previous familiarity with R is assumed.

We are offering the training to both in-person and webcast participants. Local participants are strongly encouraged to attend in person.

For more information and to register for either the in-person or webcast session, please visit:
https://portal.tacc.utexas.edu/training#/user?training=upcoming

Lonestar5 System Maintenance 28 March 2017

Posted by Matthew Edeker on Mar 16, 2017 5:59:57 PM

LoneStar5 will not be available from 8 a.m. to 12:00 p.m. (CT) on Tuesday, 28 March 2017. System maintenance will be performed during this time.


 -  TACC Team

LoneStar5 will not be available from 8 a.m. to 12:00 p.m. (CT) on Tuesday, 28 March 2017. System maintenance will be performed during this time.


 -  TACC Team

MATLAB License Server Maintenance 21 March 2017

Posted by Sergio Leal on Mar 16, 2017 1:10:27 PM

ATS Systems have scheduled a maintenance window for Matlab license server on Tuesday, 03/21/17 at 6PM CST in order to upgrade the Matlab license server to the recently released version 2017a. This maintenance is expected to take 180 minutes to complete. Users may be unable to access services...

ATS Systems have scheduled a maintenance window for Matlab license server on Tuesday, 03/21/17 at 6PM CST in order to upgrade the Matlab license server to the recently released version 2017a. This maintenance is expected to take 180 minutes to complete. Users may be unable to access services dependent on these servers while the maintenance is being performed. Matlab on TACC system may not be able to check out proper license during this period.

Wrangler Maintenance 14 March 2017

Posted by Lucas Nopoulos on Mar 7, 2017 11:21:42 AM

Wrangler will not be available from 8 a.m. to 12:00 p.m. (CT) on Tuesday, 14 March 2017. System maintenance will be performed during this time.


Thank you,

TACC Team

Updated on Mar 15, 2017 9:22:53 PM

Wrangler has been returned to production as of 8:30pm CST today.  The maintenance window was extended due to unexpected challenges moving to our UPS for the lustre infrastructure.  

Original Posting

Wrangler will not be available from 8 a.m. to 12:00 p.m. (CT) on Tuesday, 14 March 2017. System maintenance will be performed during this time.


Thank you,

TACC Team

Training: Data Management At TACC

Posted by Jason Allison on Mar 10, 2017 3:56:15 PM

April 6th, 2017 12pm-4pm CT Texas Advanced Computing Center ACB 1.104 J.J. Pickle Research Campus 10100 Burnet Rd. Austin, TX 78758 This tutorial will introduce the fundamental whys and hows of data management for research computing, with an emphasis on making effective use of TACC’s diverse...

April 6th, 2017 12pm-4pm CT
Texas Advanced Computing Center
ACB 1.104
J.J. Pickle Research Campus
10100 Burnet Rd. Austin, TX 78758

This tutorial will introduce the fundamental whys and hows of data management for research computing, with an emphasis on making effective use of TACC’s diverse storage resources to ensure the usability and reusability of your data. 

We are offering the training to both in-person and webcast participants. Local participants are strongly encouraged to attend in person.

For more information and to register for either the in-person or webcast session, please visit:
https://portal.tacc.utexas.edu/training#/user?training=upcoming

Ranch Status 3-9-2017

Posted by Matthew Edeker on Mar 9, 2017 4:46:24 PM

The Ranch system will briefly be unavailable while administrators work to resolve a problem with the system. We will update this post when the system is back in production.


 - TACC Team

Updated on Mar 9, 2017 7:13:41 PM

Ranch is back in production as of 7PM CST, however due to excessive stage calls saturating the stage queue and disabling the system, we have temporarily stopped users from issuing "stage" commands.  Most users will be able to transfer files without pre-staging. Users with large numbers of small files to be staged, please contact us, and we will help.


 -  TACC Team 

Original Posting

The Ranch system will briefly be unavailable while administrators work to resolve a problem with the system. We will update this post when the system is back in production.


 - TACC Team

Stockyard WORK Status 9 March 2017

Posted by Sergio Leal on Mar 9, 2017 9:03:06 AM

Due to hardware issues, $WORK file system access will be slow until the system administrators and our vendor engineers complete the repairs.

Updated on Mar 9, 2017 11:19:21 AM

Stockyard's WORK is back in service as of 11:15AM CST.  Administrators will continue monitoring the system for any possible remnant effects due to the interruption.

Original Posting

Due to hardware issues, $WORK file system access will be slow until the system administrators and our vendor engineers complete the repairs.

Lonestar5 Status 8 March 2017

Posted by Jacob Getz on Mar 8, 2017 4:24:38 PM

Today's issues on LS5 are due to a dvs server failing and causing home1 to become unavailable on compute nodes. We have suspended the queues and are working on the issue. We will post when LS5 resumes production.


-TACC Team

Updated on Mar 9, 2017 8:55:37 AM

The issues with the dvs server has been resolved and LS5 has been returned to production since 7pm CST. The queues were not emptied, however, and jobs running at the time of the failure were removed. Apologies for any inconvenience caused.

Original Posting

Today's issues on LS5 are due to a dvs server failing and causing home1 to become unavailable on compute nodes. We have suspended the queues and are working on the issue. We will post when LS5 resumes production.


-TACC Team

Computational Techniques for Life Sciences

Posted by Jason Allison on Mar 7, 2017 10:33:09 AM

June 5-9, 2017 The Computational Techniques for Life Sciences Institute is a five day immersive training event for researchers in the life sciences. Participants will learn the basic skills necessary to develop and execute life sciences workflows on large-scale systems, run parallel analyses, use...

June 5-9, 2017

The Computational Techniques for Life Sciences Institute is a five day immersive training event for researchers in the life sciences. Participants will learn the basic skills necessary to develop and execute life sciences workflows on large-scale systems, run parallel analyses, use Bash and Python to chain common life sciences applications together to form more complex workflows, and analyze result data in order to gain useful insights.

TACC's Life Sciences Computing team members will also spend time one-on-one with participants discussing how to accelerate their existing research or how to start a new project by beginning with the best computational practices.

Please visit the following link for details and to register:
https://www.tacc.utexas.edu/education/institutes/computational-techniques-for-life-sciences

Lonestar5 Status 6 March 2017

Posted by Sergio Leal on Mar 6, 2017 2:12:06 PM

Currently work is being done on a number of failed nodes back online. This necessitates draining the entire slot (consisting of 4 nodes) which removes healthy nodes from the queues. Capacity on LS5 will be reduced and queue times are likely to increase in the short term. We will resolve this state...

Currently work is being done on a number of failed nodes back online. This necessitates draining the entire slot (consisting of 4 nodes) which removes healthy nodes from the queues. Capacity on LS5 will be reduced and queue times are likely to increase in the short term. We will resolve this state as quickly as possible.  Thank your for your patience.

Stampede KNL Status 3/3/17

Posted by Jacob Getz on Mar 3, 2017 10:27:40 AM

The KNL portion of Stampede is currently unavailable due to a hardware problem. TACC administrators are working to resolve the problem as quickly as possible.


-TACC Team

Updated on Mar 3, 2017 12:39:55 PM

The Stampede-KNL nodes are now back in full production.


-TACC Team

Original Posting

The KNL portion of Stampede is currently unavailable due to a hardware problem. TACC administrators are working to resolve the problem as quickly as possible.


-TACC Team

Ranch Maintenance 7 March 2017

Posted by Sergio Leal on Feb 24, 2017 2:12:56 PM

TACC’s Ranch will not be available from 8 a.m. to 5:00 p.m. (CST) on Tuesday, March 7th 2017. System maintenance will be performed during this time.

TACC’s Ranch will not be available from 8 a.m. to 5:00 p.m. (CST) on Tuesday, March 7th 2017. System maintenance will be performed during this time.

Lonestar5 Status 20 February 2017

Posted by Sergio Leal on Feb 20, 2017 10:32:27 AM

LS5 is currently unavailable due issues with the home1 filesystem. Login nodes are unavailable and job submissions are not possible. We will provide an update as soon as LS5 becomes available again.

Updated on Feb 21, 2017 1:28:35 PM

LS5 scratch filesystem maintenance is now complete and the queues and login nodes have been reopened. Thank you for your patience

Updated on Feb 20, 2017 1:56:35 PM

We will be having a maintenance window tomorrow, 21 February 2017, between 12:00pm and 2:00pm CST.  We require this window to improve some of the issues we experienced on /scratch created from our power event this morning.  We apologize for this short notice as any jobs that overlap during this timeframe tomorrow will be removed.

Updated on Feb 20, 2017 1:06:04 PM

We've returned LS5 to production. Please note that if you are a user that uses login nodes other than login1,login2 and login3 then you should hold off on submitting jobs, work is still being done on those other nodes. 

Original Posting

LS5 is currently unavailable due issues with the home1 filesystem. Login nodes are unavailable and job submissions are not possible. We will provide an update as soon as LS5 becomes available again.

Lonestar5 Status February 16, 2017

Posted by David Littrell on Feb 16, 2017 4:12:26 PM

We've been unable to recover from lustre issues on LS5 today and are about to start a system maintenance in order to restore access. We've been trying to avoid interfering with running jobs but this maintenance will remove currently running jobs.

Thanks for your patience

Updated on Feb 16, 2017 11:48:43 PM

LS5 has been returned to production and the queues are open. We apologize for the inconvenience.

Original Posting

We've been unable to recover from lustre issues on LS5 today and are about to start a system maintenance in order to restore access. We've been trying to avoid interfering with running jobs but this maintenance will remove currently running jobs.

Thanks for your patience

Lonestar 5 Status 2/16

Posted by Lucas Nopoulos on Feb 16, 2017 2:15:56 PM

LS5 was not able to access /work between 12:45 and 13:50 today when the issue was resolved. This  would have affected jobs reading and writing to that filesystem, users should check their output. Any jobs timing out will be cleared over the next few hours. Apologies for any inconvenience caused....

LS5 was not able to access /work between 12:45 and 13:50 today when the issue was resolved. This  would have affected jobs reading and writing to that filesystem, users should check their output. Any jobs timing out will be cleared over the next few hours. Apologies for any inconvenience caused.


Thanks

TACC Team

Designing and Administering Large-scale Systems

Posted by Jason Allison on Feb 9, 2017 2:21:27 PM

Designing and Administering Large-scale Systems April 17-21, 2017 Register: https://www.tacc.utexas.edu/education/institutes/designing-and-administering-large-scale-systems The TACC Designing and Administering Large-scale Systems institute provides attendees who already have some knowledge in...

Designing and Administering Large-scale Systems
April 17-21, 2017

Register: https://www.tacc.utexas.edu/education/institutes/designing-and-administering-large-scale-systems

The TACC Designing and Administering Large-scale Systems institute provides attendees who already have some knowledge in administering Linux servers with an introduction to the concepts, tools, and best practices to administer large-scale Linux-based clusters and data center installations. Attendees will build small-scale clusters using the same tools and practices used by TACC systems administrators. Certificates of attendance will be provided to all attendees.

Topics covered:
- System Design and the Top500
- Provisioning nodes using Cobbler
- Server synchronization using LoSF
- Resource management and job control using SLURM
- User environment management using LMod
- Software usage tracking using XALT
- Application packing using RPM
- Securing access to large-scale systems

Stampede status 21 February 2017

Posted by David Littrell on Feb 7, 2017 2:33:25 PM

Stampede will not be available from 8 a.m. to 7:30 p.m. (CT) on Tuesday, 
21 February 2017. System maintenance will be performed during this time.

Stampede will not be available from 8 a.m. to 7:30 p.m. (CT) on Tuesday, 
21 February 2017. System maintenance will be performed during this time.

Ranch Announcement 2.1.17

Posted by Lucas Nopoulos on Feb 1, 2017 10:58:08 AM

A Ranch server was rebooted around 10:50AM CST, and will be down for a short time, while administrators sort the problem out. We will update this announcement when the system is back in full production.

 

- TACC Team

Updated on Feb 1, 2017 11:28:28 AM

Ranch is now back in full production


- TACC Team

Original Posting

A Ranch server was rebooted around 10:50AM CST, and will be down for a short time, while administrators sort the problem out. We will update this announcement when the system is back in full production.

 

- TACC Team

Ranch status 1/25/2017

Posted by David Littrell on Jan 25, 2017 10:16:20 AM

Ranch servers experienced a problem around 10:00AM CST, and will be down for a short time, while administrators sort the problem out. We will update this announcement when the system is back in full production.

Updated on Jan 25, 2017 11:15:33 AM

Ranch is back in production.

Original Posting

Ranch servers experienced a problem around 10:00AM CST, and will be down for a short time, while administrators sort the problem out. We will update this announcement when the system is back in full production.

Lonestar 5 Maintenance 1/24

Posted by Lucas Nopoulos on Jan 18, 2017 1:52:57 PM

LoneStar5 will not be available from 8 a.m. to 5:00 p.m. (CT) on Tuesday, 24 January 2017. System maintenance will be performed during this time.


-TACC Staff

Updated on Jan 24, 2017 4:09:54 PM

Maintenance is complete. Queues and login nodes are now available.


-TACC Team

Original Posting

LoneStar5 will not be available from 8 a.m. to 5:00 p.m. (CT) on Tuesday, 24 January 2017. System maintenance will be performed during this time.


-TACC Staff

Wrangler/Corral Status 1/24/19

Posted by Jacob Getz on Jan 24, 2017 9:19:41 AM

Corral3 will be undergoing maintenance today and will not be available on Wrangler. Because some Wrangler users might not subscribe to the Corral3 mailing list, we are issuing a second announcement. Apologies for the late notice.


Thank you,


-TACC Staff

Corral3 will be undergoing maintenance today and will not be available on Wrangler. Because some Wrangler users might not subscribe to the Corral3 mailing list, we are issuing a second announcement. Apologies for the late notice.


Thank you,


-TACC Staff

Introduction To The PETSc Library

Posted by Jason Allison on Jan 23, 2017 3:46:01 PM

February 10th, 2017 9am-4pm CT Texas Advanced Computing Center ACB 1.104 J.J. Pickle Research Campus 10100 Burnet Rd. Austin, TX 78758 The Portable Extendible Toolkit for Scientific Computing (PETSc) provides a framework for the development of computational science codes. Its focus is on solving...

February 10th, 2017 9am-4pm CT
Texas Advanced Computing Center
ACB 1.104
J.J. Pickle Research Campus
10100 Burnet Rd. Austin, TX 78758

The Portable Extendible Toolkit for Scientific Computing (PETSc) provides a framework for the development of computational science codes. Its focus is on solving linear and nonlinear systems, but it is more than a collection of algorithms: it is a complete toolkit supporting parallel data structures, linear algebra, PDEs, meshes. PETSc is designed for scalable parallelism, and contains debugging and profiling support.

This course will discuss the basic PETSc objects and how they make up a PETSc code. Upon completion of this course, you should be able to independently develop scalable scientific simulation codes with the PETSc library.

For more information and for access to register for this course, please visit the following link:

https://portal.tacc.utexas.edu/training#/user?training=upcoming

Wrangler status January 19 2017

Posted by David Littrell on Jan 19, 2017 3:18:08 PM

Wrangler currently has another issue with the /data filesystem - we are attending to it and expect it to be resolved shortly.


Updated on Jan 19, 2017 3:46:34 PM

Wrangler's filesystem issue is resolved and /data is restored. Apologies for the inconvenience.

Original Posting

Wrangler currently has another issue with the /data filesystem - we are attending to it and expect it to be resolved shortly.


Corral Maintenance 1/24

Posted by Lucas Nopoulos on Jan 18, 2017 1:57:36 PM

We will be performing hardware maintenance from 10AM to 2PM on January 24, 2017. All Corral file access mechanisms including web and iRODS services will be unavailable during this time.


Thank you,


-TACC Staff

We will be performing hardware maintenance from 10AM to 2PM on January 24, 2017. All Corral file access mechanisms including web and iRODS services will be unavailable during this time.


Thank you,


-TACC Staff

Ranch Status 13 January 2017

Posted by Sergio Leal on Jan 13, 2017 3:36:10 PM

Ranch is currently experiencing tape library problems.  Administrators are working with our vendors for a resolution.  Further updates will posted as they become available.

Updated on Jan 14, 2017 8:08:44 PM

Ranch is back up as of 8pm 1/14/17, after the software problem was resolved.

Original Posting

Ranch is currently experiencing tape library problems.  Administrators are working with our vendors for a resolution.  Further updates will posted as they become available.

Courses on Manycore Programming (KNL)

Posted by Jason Allison on Jan 12, 2017 4:37:29 PM

On February 3rd, 2017; TACC will be offering a morning introductory course and an afternoon advanced course on Manycore concepts (KNL). You are welcome to register for either or both courses. Both of the courses are available to in-person and webcast participants. Local participants are strongly...

On February 3rd, 2017; TACC will be offering a morning introductory course and an afternoon advanced course on Manycore concepts (KNL).

You are welcome to register for either or both courses. Both of the courses are available to in-person and webcast participants. Local participants are strongly encouraged to attend in person. For details on course content and for access to register for these courses, please visit the following link:

https://portal.tacc.utexas.edu/training#/user?training=upcoming

Lonestar5 Status January 4, 2017

Posted by David Littrell on Jan 4, 2017 2:01:44 PM

LS5 has had a hardware failure in infrastructure supporting the Slurm scheduler. We are working to resolve the problem. The queues are currently unavailable, apologies for the inconvenience. 

Updated on Jan 5, 2017 11:25:26 PM

Lonestar5 has been returned to production and is available for job submissions. Unfortunately it was not possible to preserve the state of the queue so any jobs that were queuing will have to be resubmitted. Apologies for the inconvenience caused.

Original Posting

LS5 has had a hardware failure in infrastructure supporting the Slurm scheduler. We are working to resolve the problem. The queues are currently unavailable, apologies for the inconvenience. 

Ranch status 12/23/2016

Posted by David Littrell on Dec 23, 2016 10:29:25 PM

Due to a hardware issue on the tape library, Ranch will be under maintenance until Saturday, December 24. 

Updated on Jan 2, 2017 10:58:11 AM

Ranch is back in full production as of 5:50pm CST on Monday, Dec. 26.

Original Posting

Due to a hardware issue on the tape library, Ranch will be under maintenance until Saturday, December 24. 

TACC Holiday Schedule

Posted by Jesse Snead on Dec 21, 2016 8:36:36 AM

TACC personnel will observe the University of Texas at Austin winter break from 5 p.m. (CT) on Thursday, 22 December 2016, and will resume normal business hours on Monday, 2 January 2017. A staff member will be on site to monitor the status of all TACC resources in an effort to ensure continuous...

TACC personnel will observe the University of Texas at Austin winter break from 5 p.m. (CT) on Thursday, 22 December 2016, and will resume normal business hours on Monday, 2 January 2017. A staff member will be on site to monitor the status of all TACC resources in an effort to ensure continuous availability. TACC support staff will monitor the consulting system throughout the holiday period and answer critical user questions. Non-critical user questions will be addressed beginning Monday, 2 January 2017.


Please submit any questions you may have through the TACC Consulting System or feedback form. 
https://portal.tacc.utexas.edu/tacc-consulting 
https://portal.tacc.utexas.edu/feedback

Ranch Status 16 December 2016

Posted by Sergio Leal on Dec 16, 2016 9:52:05 AM

Ranch is currently experiencing a hardware issue at the backend library

interface. TACC administrators are working to resolve the issue as soon

as possible.  An update to User News will be posted once Ranch is back

in production.

Updated on Dec 16, 2016 2:42:09 PM

Ranch is back in service as of 14:40 CST.

Original Posting

Ranch is currently experiencing a hardware issue at the backend library

interface. TACC administrators are working to resolve the issue as soon

as possible.  An update to User News will be posted once Ranch is back

in production.

Matlab License Server Maintenance Dec. 15th 6pm CT

Posted by Jason Allison on Dec 13, 2016 2:52:31 PM

Academic Technology Support (ATS) systems of University of Texas at Austin has scheduled a maintenance window for Matlab license servers on Thursday, 12/15/16 at 6PM in order to install Operating System/Security Patches. This maintenance is expected to take about 180 minutes to complete. Users, who...

Academic Technology Support (ATS) systems of University of Texas at Austin has scheduled a maintenance window for Matlab license servers on Thursday, 12/15/16 at 6PM in order to install Operating System/Security Patches. This maintenance is expected to take about 180 minutes to complete. Users, who work with UT Austin Matlab license, may be unable to access services dependent on these servers while the maintenance is being performed.

If you any questions regarding this notification please submit a ticket at:
https://portal.tacc.utexas.edu/tacc-consulting

Visualization Portal Status 8 December 2016

Posted by Sergio Leal on Dec 8, 2016 1:16:38 PM

The vis portal is currently offline and the administrators are working on a solution.  We do not have an ETA but command-line launch of job.vnc on systems still work as expected.

Updated on Dec 8, 2016 3:51:34 PM

The vis portal is back to normal operation

Original Posting

The vis portal is currently offline and the administrators are working on a solution.  We do not have an ETA but command-line launch of job.vnc on systems still work as expected.

Lonestar 5 Maintenance 29 November 2016

Posted by Sergio Leal on Nov 23, 2016 6:25:48 PM

Lonestar5 will not be available from 8 a.m. to 6:00 p.m. (CT) on Tuesday, 29 November 2016. Maintenance on filesystem hardware will be performed during this time.

Updated on Nov 29, 2016 6:32:21 PM

Our estimated extension only required 30minutes - Lonestar5 queues and login nodes have been reopened as of 6:30 p.m (CT).

-TACC Team

Updated on Nov 29, 2016 3:15:42 PM

LoneStar5 maintenance window will run an estimated 2 hours longer than originally planned. New times are: 8 a.m. to 8:00 p.m. (CT).


-TACC Team

Original Posting

Lonestar5 will not be available from 8 a.m. to 6:00 p.m. (CT) on Tuesday, 29 November 2016. Maintenance on filesystem hardware will be performed during this time.

Stampede Maintenance 6 December 2016

Posted by Sergio Leal on Nov 22, 2016 3:30:13 PM

Stampede will not be available from 8 a.m. to 7:30 p.m. (CT) on Tuesday,
6 December 2016. System maintenance will be performed during this time.

Stampede will not be available from 8 a.m. to 7:30 p.m. (CT) on Tuesday,
6 December 2016. System maintenance will be performed during this time.

Hikari Maintenance 6-9 December 2016

Posted by Sergio Leal on Nov 22, 2016 3:28:39 PM

Hikari will not be available from 8 a.m. (CT) on Tuesday December 6 thru 5 p.m. (CT)  thru Friday 9 December for HVDC maintenance.

Hikari will not be available from 8 a.m. (CT) on Tuesday December 6 thru 5 p.m. (CT)  thru Friday 9 December for HVDC maintenance.

Introducing the TACC Institute Series

Posted by Jason Allison on Nov 16, 2016 4:04:32 PM

The TACC Institute Series offers attendees five days of intense, immersive training in advanced computation, with topics ranging from developing parallel applications for modern high performance computers to visualizing and analyzing large data sets, administering leadership-class advanced...

The TACC Institute Series offers attendees five days of intense, immersive training in advanced computation, with topics ranging from developing parallel applications for modern high performance computers to visualizing and analyzing large data sets, administering leadership-class advanced computing systems, executing reproducible experiments in the cloud, and purchasing and operating considerations for organizations wanting to add advanced computing resources to their R&D portfolio. 


Here is a list of the institutes currently scheduled:

 

Designing and Administering Large-scale Systems - April 17-21, 2017

Computational Techniques for Life Sciences - June 5-10, 2017

Visualizing and Interacting with Data - June 19-24, 2017

Data and Information Analytics - June 19-24, 2017

Computational Science in the Cloud - July 24-29, 2017

Parallel Programming Foundations - July 31-August 4, 2017

Advanced Computing Concepts for Managers - September 11-15, 2017

 

Please visit the following link for details and to register.  We look forward to your attendance.

https://www.tacc.utexas.edu/education/institutes

Lonestar 5 Maintenance 11/22

Posted by Lucas Nopoulos on Nov 10, 2016 3:49:40 PM

LoneStar5 will not be available from 8 a.m. to 5:00 p.m. (CT) on Tuesday, 22 November 2016. Maintenance on filesystem hardware will be performed during this time.


-TACC Team

LoneStar5 will not be available from 8 a.m. to 5:00 p.m. (CT) on Tuesday, 22 November 2016. Maintenance on filesystem hardware will be performed during this time.


-TACC Team

Stampede Status 9 November 2016

Posted by Sergio Leal on Nov 9, 2016 10:32:10 AM

Stampede is currently experiencing a HOME filesystem issue. TACC

administrators are working to resolve the problem as quickly as possible.

Updated on Nov 9, 2016 10:44:09 AM

The $HOME filesystem was down from 10:08 to 10:40 am CST. It is now back online. 

Original Posting

Stampede is currently experiencing a HOME filesystem issue. TACC

administrators are working to resolve the problem as quickly as possible.

Lonestar Status 11/04/16

Posted by Jacob Getz on Nov 4, 2016 12:16:36 PM

There will be a brief file system outage today at 1:30.   


TACC networking team need to swap out a failing optical connecter.  Service may be interrupted for a few moments, but clients should recover mount points.   

 

Look to user news for updates.

-TACC Team

There will be a brief file system outage today at 1:30.   


TACC networking team need to swap out a failing optical connecter.  Service may be interrupted for a few moments, but clients should recover mount points.   

 

Look to user news for updates.

-TACC Team

Wrangler Status 11/08/16

Posted by Jacob Getz on Oct 31, 2016 9:11:02 AM

Wrangler's service nodes will not be available from 8:00 a.m. to 2:00 p.m. (CST) on Tuesday, November 8th 2016. System maintenance will be performed during this time. Login and compute will remain available and jobs that do not depend on databases running on the service nodes will not be affected....

Wrangler's service nodes will not be available from 8:00 a.m. to 2:00 p.m. (CST) on Tuesday, November 8th 2016. System maintenance will be performed during this time. Login and compute will remain available and jobs that do not depend on databases running on the service nodes will not be affected.

-TACC Team

TACC VIS Lab Closed 31 October 2016

Posted by Sergio Leal on Oct 27, 2016 9:11:02 AM

 The Vislab will be closed Monday October 31st, 2016. Our full time staff will be up north that day performing work for our other vislab. We will reopen our doors at 9 a.m. Tuesday morning.

 The Vislab will be closed Monday October 31st, 2016. Our full time staff will be up north that day performing work for our other vislab. We will reopen our doors at 9 a.m. Tuesday morning.

Stampede Status 10/26/2016

Posted by Lucas Nopoulos on Oct 26, 2016 10:11:58 AM

The TACC data center experienced a power loss on one phase of the primary electrical feed at approximately 9:35 this morning which caused about 2/3rd of the Stampede nodes to shut down.   The storage systems and login nodes are available but the queues are currently closed while we restore the...

Updated on Oct 26, 2016 2:12:20 PM

Stampede is back in production at 1:30 pm cst. 

Original Posting

The TACC data center experienced a power loss on one phase of the primary electrical feed at approximately 9:35 this morning which caused about 2/3rd of the Stampede nodes to shut down.   The storage systems and login nodes are available but the queues are currently closed while we restore the compute nodes to service.   An update to user news will be posted once queues are available again.


-TACC Team

Lonestar5 Status 10/26/2016

Posted by Lucas Nopoulos on Oct 26, 2016 10:21:15 AM

The TACC data center experienced a power loss on one phase of the primary electrical feed at approximately 9:35 this morning which caused Lonestar 5 to shut down.   Access to the storage systems and login nodes will be intermittent until all services are restored.   An update to user news will be...

Updated on Oct 26, 2016 2:07:40 PM

Lonestar is back in production at 1:30 pm cst. 

Original Posting

The TACC data center experienced a power loss on one phase of the primary electrical feed at approximately 9:35 this morning which caused Lonestar 5 to shut down.   Access to the storage systems and login nodes will be intermittent until all services are restored.   An update to user news will be posted once the system is available again.

-TACC Team